Sidewinder X1 - Side Toolbox with Top Cover

Added a Top Cover to the nice toolbox from @hubbablubba ( https://www.thingiverse.com/thing:4444982 ).

I used the remix from @HeyRay2 ( https://www.thingiverse.com/thing:4542165 ) as i liked the idea of printing the toolbox itself without support.

Attention: I recommend not using the lock, instead just glue 2-4 magnets on the bottom of the top cover and the same on the inside of the main toolbox. The lock doesnt work as expected.

The small lock is used to keep the cover itself in place. I wanted to make it possible to print without support therefore i decided to use the small lock to be able to do it without any support needed. Just push it through the whole and you can rotate the top cover around it or just take it of, feel free.

I always screw some nuts and screws and they are laying around everywhere.... therefore i used the toolbox but also with that i wasn 100% pleased. So i needed a top cover where i can place the screws and nuts and keep the tools itself beneath it (or you can use it as trashbin for small failed parts... ;-) ).

Feel free to post a make whenever you've printed it :-)