Resistance Bomber/Squadrons Tactical Chest Box

2-Feb-2021: Prints successful after some small edits. If parts are accidentally too small, scale up by 10x.

30-Jan-2021: Parts have been modified to allow for assembly, lighting, and mounting. Further, different versions of the base have been made to cover the NR Squadrons Tactical variant as well as the Resistance Bomber, but the Squadrons Tactical Variant requires extra attention (below). The Control unit MUST be oriented as provided to minimize aliasing, unless printed on a mSLA machine (use mSLA variant). Interfaces for the magnets or tubing may be necessary. Designed for up to 1.25" strapping as per RL Costume standards. This has not been printed yet. Once it has been, I will update this thing if there are errors. More stats are as follows:

Resistance Bomber:
-Top Hole: 20mm ID
-Bottom Hole: 25.4 mm ID

Squadrons Tactical:
-Scale to 106.667%
-The parts will fit more loosely due to tolerance dimensioning increasing
-The magnet holes will need filling or adjustment.

15-Jan-2021: This is a raw extract mesh of a Resistance Bomber Chest Box. The model is also used as a New Republic chest box for the 'Tactical' variant flightsuit in Star Wars: Squadrons (Scale up by 106.667%). As of now, this mesh should be considered reference only, and will likely not print, or print poorly. Future updates to this project should bring it to printable status, provided I don't abandon the project. CAD will be provided when it exists.