This is a filament cleaner and backspin preventer for the QIDI X-Plus and X-Max. It was originally designed for one of my other designs but I never included it there. It should fit all printers using a 6 mm bowden tube as well.
To use, print the two parts. Cut a piece of sponge and place it inside the cylinder. Cut the filament at an angle and thread it through. Screw the two parts together. Place the cylinder over the black filament guide, it should secure itself. You can use it internally like I have done here or anywhere you like.
Next, load the filament in your extruder and you're done.
Print Settings
Printer:
QIDI Tech X-Max
Rafts:
NoSupports:
No
Resolution:
0.20 mm
Infill: 25%
Filament: Fillamentum ABS Traffic Red
Notes:
Print the parts as I have placed them. You shouldn't need to use supports.
humebeam
