Tiny Towns Insert

This is my custom board game insert for the game Tiny Towns, with space for the Fortune, Villagers and Tiny Tree expansions. I'm always welcome to constructive criticism, or suggestions for improvement. Feel free to comment!

The card box for this insert is designed to hold the cards for the game and the expansions. I designed it to fit sleeved cards, though I do not sleeve my cards so I cannot test that theory. If someone wants to measure and get me sizes for sleeved cards, I can confirm that they will fit. Otherwise, everything easily fits into the box

For the upgraded resources, I designed a glass block that can be printed with no supports. It is included as part of this design. I recomment translucent filament for this print, as it looks pretty cool with the infill showing through. For the other resources, I printed them from the following things on Thingiverse:

Stone - https://www.thingiverse.com/thing:3013912 - I printed design #8 from this set. I increased the size on the X and Y axis by 200%, and increased the Z axis to exactly 10mm. I also dropped the model 2mm below the build plate, so it prints with a flat bottom

Brick - https://www.thingiverse.com/thing:4265320 - I dropped the model 0.6mm below the build plate, so it was easier to print. I also used support on this print

Wheat - https://www.thingiverse.com/thing:4265320 - I dropped the model 0.8mm below the build plate so it has a flat bottom

Wood - https://www.thingiverse.com/thing:2738575 - I used the WoodBestREP2018 model

For printing the boxes, print one of each and 2 of the building box. I've included a file listing the boxes, approximate cost and time to print as a reference

Thanks!