Ubiquiti AP Thin Mount

Simple laser cuttable spacer for Ubiquiti APs.

I used this as my ceiling wasn't entirely flat, and, I couldn't get the AP to clip in without a bit of space behind as the AP was hitting some of the ceiling patterning. This spacer, cut from 3mm acrylic provides just enough space. There are several of these out there for 3D printing, but that takes hours. This can be cut in around 1 minute.

Should fit UAP-AC-Lite, UAP-AC-LR and UAP-NANOHD-US. Will not fit the Pro or HD.

Holes are on a 61.5mm diameter ring at 90-degree spacing.

Outer diameter is 71.5mm, inner diameter is 51.5mm.