EDgun Leshiy 2 - .30 (7.62mm) Puck

My brother accidentally dry fired his EDgun Leshiy 2 without the magazine installed and broke the puck. It came with one spare but my brother wanted another one just to be safe. He asked if I could 3D print him one. A few minutes with a caliper and an hour of printing later he had 20 spares.

This file is for the .30 (7.62mm) pellet, I have included the Fusion 360 files so that you can adapt it for other pellet sizes (if the size varies).

You will also need o-rings (I will see if I can figure out what size he used, no promises though).

There are two version files for this, v2.0 is more accurate to the original part but was a bit more breakable with the type of resin that I used, v1 (not marked) works just fine and printed a bit better with my resin. I also have included .stl files both with and without support.

Please note that due to the small size and detail required this was designed to be printed on a resin printer. I would not recommend printing on an FDM printer.