Parkside X20V Team Charger Wall Mount

Sorry for the incomplete description, but Thingiverse still sucks. Playing with this shitty interface and service is a waste of time.

I present the mounting brackets for the Parkside X20V Team charger from the LIDL store. Mounting brackets allow the charger to be mounted to a cabinet or wall.

---

This is my project of useful gadgets and portable wireless devices for Parkside X20V batteries. There are:

• Mounting brackets for the charger
• Battery mounting bracket (shelf and wall mount)
• Floodlight / Work Light - LED 10W
• Audio amplifier TPA3116 Wuzhi - maximum output power RMS 2x20W/4R, 2x24W/8R
• Power supply DPS3005 (max 19.5V/5.1A) - available on Cults3D.com only
• Soldering station KSGER T12 OLED - available on Cults3D.com only

STEP files are available so you can modify them to suit your needs.

If you like this project and appreciate my work, you can support me through PayPal.

---

You need:

• 4 pieces 3x6 mm wood screws
• 3 pieces 3.5x16 mm wood screws

The photos should explain everything.
Put the printed parts in place. Drill holes for 3x6 mm screws (do not use screws longer than 6 mm). Screw the printed holders to the charger.
Attach the charger to the side of the cabinet or to the wall.

---

The third photo shows the recommended orientation of the elements when printing.
Walls thickness 1.6 mm (4 shells). Layer height 0.2 mm. Infill 25-30%.