February 3, 2021
Description
This is a basic housing for the 3.3 Volt Ultrasonic Sensor RCWL-1601, which might be used in place of the HC-SR04 (which is 5V).
The benefit of the RCWL-1601 is that it may be wired directly to a Raspberry Pi without resistors, so you don't need a bunch of extra wires.
The housing is just a box with a back that pops into place. Base is held in place by small bump-outs which fit into small cups on the inside of the case. Opening at the bottom of the box allows connection to the sensor's pins.
License:
Creative Commons - Public Domain Dedication
Ln0
