Guard rails for Yeasu FT-991(a) radio

These should fit both the FT-991 and the FT-991a models. They will fit diagonally on a CR-10 bed, but will have to be split for smaller printers. I make mine out of Pro-PLA and they have held up pretty well. I would print them with as many walls as possible to make them as strong as possible. When printing rotate the part so that the flattest side is down on the bed (i.e. the side without the cut outs).

Use 4mmx22mm screws to mount them to the radio. NOTE: the flat part (i.e. the bed side) faces out when mounting these. It will seem backwards, but its correct.

I desinged these in onshape, the document is public: https://cad.onshape.com/documents/e53ec59b7184d48631c1ce09/w/5f4c1d58916747ce1a4ea56d/e/2bf8c4137f43c9abafd667f0