Yet another cable clip organizer that should fit cables between 4 and 6.5 mm in diameter.
- Relatively fast to print
- You can slightly scale it up or down to adjust the size on your needs
- Best to print with PET-G but PLA might works just fine
- Tested with USB, Ethernet and HDMI cables
- If don't have good grip on the bed use brims
- You can clone the single clip an get less or more clips in the row
I uploaded one an STL for one cable and another one for 11 cables.
Print time with Prusa Slicer:
- 0.32mm fast, no brims ~ 34 minutes
- 0.2mm slow, no brims ~54 minutes
decoder
