February 11, 2021
Description
UPDATE:
I found an issue with my design where the drawer is not able to go in completely due to the screw mount blocking it. It can be addressed in post-process by shortening the drawer or removing the screw mount.
I will update the files with a correction (probably make the shell longer) as soon as possible.
Rev .2
Added new shell with more ventilation.
Reduced height of rails for better drawer fit.
Rev .1
Specifically for CNC machines, this enclosure provides a finished and professional look. The x, y, z markings provide easy access and troubleshooting.
The assembly provides a drawer style mount for the 2560 + Ramps for easy insertion and removal from the shell.1
The drawer front plate includes properly sized holes for XH connectors to be permanently mounted. The first 2 or 3 layers of the plate have a smaller hole than the rest of the layers so that the connectors can be placed in the hole without falling through and then hot glued in place. It is messy, but it works. It is best to solder wires onto the connectors before gluing them to the mount.
More photos coming.
(Note the arduino and ramps images are not mine; they were sourced from grabcad
2560 By Robotronic @ https://grabcad.com/library/arduino-mega-atmega-2560-1
Ramps... I cant locate the source for this model. If you recognize it, please let me know so I can give credit.
License:
Creative Commons - Attribution - Non-Commercial
MakerMarc
