February 17, 2021
Description
Scale model 1:100 of the lighthouse Obereversand at the german north sea coast near Cuxhaven (Dorum-Neufeld).
The model consists of three main parts (house,platform and truss) and ten nodes for the truss structure.
To get an 1:100 model use a uniform scaling of 1000%.
All main parts require customized support structures.
I printed the truss in one print, but I would suggest to split the truss part in half (at the middle layer) to save some of the support structures.
For trusses I used 0.8 mm wire. To set their position I used modelling glue (UHU Plast Special)
As a window you can simply use a small piece of white paper.
The lighthouse can actually be enlighted by using a 9V battery, resistor, LED, battery-snap-contact and switch. If you like to be fancy and switch on the light wireless you could use a mini wireless relais.
The platform has a hole in the middle which can be use for e.g. a power supply. If you use a battery you can print it without the hole.
Thanks to Förderverein Leuchtturmdenkmal Obereversand e. V. to providing the technical drawnings!
License:
Creative Commons - Attribution