February 12, 2021
Description
Just a basic box to enclose and mount the BTT UPS 24V v1.0, knowing me I have probably over engineered this ;)
To secure the base part to extrusion use 2x M3x8mm machine screws with 2x M3 T nuts, maybe a thin washer too.
Fit the UPS to the top plate using 4x M3x5x4.2mm threaded brass inserts with 4x M3x8mm machine screws.
Power and signal cable can be connected to the UPS & fed through the cutouts in the base part.
This top plate is then fitted upside down on to the base part using 4x M3x5x4.2mm threaded brass inserts with 4x M3x10mm machine screws.
The enclosure can be mounted either side as I have allowed holes for that or if you need to have the cables entering from the front of your printer, mine exit at the back and I have my enclosure mounted under my bed.
License:
Creative Commons - Attribution
1CM69
