Animal mix n match - Steve

** Animal mix n match **

Put a chicken leg in place of the crocodile head, a pig tail in place of its leg. Make the most absurd creature possible!

** Printing **

Head:

• steve_head.stl (skin colour) x1
• steve_hair.stl (black) x1
• steve_eye.stl (white, switch to blue half way) x2

Body:

• steve_body.stl (sky blue) x2

Legs:

• steve_leg.stl (grey, switch to blue at 6.4mm) x2

Arms:

• steve_arm.stl (skin colour) x2
  The arm STL have a hole in the hand with 0.2mm clearance. You can alternatively print the steve_arm_0.3mm_clearance.stl file, if your printer struggles with tight clearances.

NOTE: To have blue shoulders, you can change the print orientation to have the arms point up, print with sky blue colour up to 12.8mm then change to skin colour. You will need to print with supports, or at least with brim to print the ball joint properly.

Tools (optional):

• steve_pickaxe.stl (grey) x1
• steve_sword.stl (grey) x1

** Assembly **

1. Press the eyes in the eye sockets. Be careful of the orientation. You wont be able to get it out.
2. Put hair on top of the head.
3. Put tools in hand. It they are too tight, sand the handle until it can be put it the hand and removed without excessive force.
4. Put the 2 body halves together and join them with small rubber bands.
5. Clip body parts to the body, have fun!