Tool holder collection for square holed pegboard, such as Blika pegboards.

All dimensions are given in millimeters

Note: I am currently adding my repertoire to thingiverse when I have spare time, so the collection will get more items.

####Dimensions used in the designs (All my designs are designed to be snug fit to the given dimensions):

• Distance from center to center of the holes: 34 mm
• Hole size: 9.85 mm (manufacturer spec is 10mm)
• Plate thickness: 1.8 mm.

Why make your own?

The square hole tool choice is sparse, as the round holed pegboards are obviously the most used.
I just wanted my tools hanging and had some goals to call it a success:

• It must work reliable and NEVER accidentally fall out by itself.
• It must be a snug fit, as I want it to stay in place and not wobble around.
• Minimal post processing - if any at all.... I hate post processing

Versions

I have tried to name the files with the info needed to make a choice.

Hardware

None, as the lock is 3D printable.

Printing notes

Some parts needs supports (I have tried to remember to add SUPPORT to the name of the items needing support..
I have placed all parts in the best printable orientation for strength/printability.

Assembly notes

See youtube clip here: Assembly and disassembly instructions
The tabs goes into the hole(s) and is then pressed down to latch onto the pegboard.
I have designed a lock to put into the space above the tab to avoid it being pushed up when lifting the tool off the holder. The lock will click into place when put in.

Disassembly notes

The lock can be pulled out by using the tab on the front of it. Then just slide the tabs up and take it out of the pegboard.

Change Notes

Change notes will be updated as new features/changes are made.

• 2021-02-20: Released
• 2021-02-22:
  • Add:
    • Bin (W72 x H60)
    • Bin insert (2x2) (room separator)
    • Caliper
    • Holder (X2Y1): (W26 x D13.5)
    • Holder for Tool: "Irwin Strait-Line"
• 2021-02-23:
  • Add
    • Holder (X2Y1): (W x D)
      • (14,5 x 8)
      • (22,5 x 7,5)
      • (29,5 x 10)
      • (37 x 14)
  • Change:
    • All models to have better print tolerances based on feedback on bridging issues.
• 2021-02-24:
  • Add:
    • Holder (X2Y1 open-front): (W x D |*| FrontCut upper v bottom):
      • (26 x 13,5 |*| 13 v 10)
    • Protective Shield (One end fits behind the holder another into the normal hole system).
      • X2Y1 (Covers from the holder down to the holes below it).
      • X2Y2 (Covers from the holder and 2 holes below it).
  • Change:
    • All Holder models can now be combined with the Protective Shields (to avoid scratching the pegboard).
• 2021-02-25
  • Add:
    • Platte (X2Y1): (W60 x D60)