February 20, 2021
Description
Tired of seeing picatinny rails on Star Wars blasters, I made a quick design to fill them in. Glue these in place and then you can fill and sand over them to create a smooth surface. This was designed to fit a CYMA M4 but probably will fit others, you may need to re-scale for your own rail.
Print at least 5 of them at a time to allow for enough cooling between layers, I recommend 10 or more. Printed out of PLA at 210c. Make sure the bed is cool before removing them or you will warp the bottom and they won't fit properly.
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
3,396
Domo_Designs
