Stylus holder for Wacom tablet

This is a quick design for a Wacom stylus holder.
the long tab is designed to simply slip below the tablet. its thin enough not to interfere with the tablets stability as it slips between the rubber feet.
it has a trapezoidal thread around the outside just to make it less boring

print setting I used are:
PLA 200c
Bed temp 70c
no raft or brim
support only in the threads
ender 5 pro with 0.2 layer height
80mm/sec

print time 1hr 17 mins
9g/3.1mm of filament