Dust Collection Accessories (15)

These are an assortment of Dust Collection Accessories that I've designed. I may be adding more as I need them or possibly upon request for something, so feel to ask for custom sizes or modifications and I'll see what I can do for you. I've also added the actual dimensions to all the parts to make it easier for you to make sure these will fit your needs.

• 2.25'' Dust-Internal Inlet V1 -This is the first version I made for the internal part for a dust separator which your vacuum/dust collection hose would attach to.
OD = 2.25" ID = 2.125"
Tube = 2" - Flange = .25" - Total Height = 2.25"

• 2.25'' Dust Internal-Inlet V2 - This is the second version I made, which seems to do a better job at keeping the finer dust particles from going to the dust collector.
OD = 2.25" ID = 2.125"
Tube = 2" - Flange = .25" - Total Height = 2.25"

• 2.25'' Dust Intake - This is a 3.25"X7" intake port for the external part for a dust separator or power tool which your vacuum/dust collection hose would attach to.
OD = 2.25" ID = 2.125"
Intake and Tube = 1.5" (ea.) - Insert Lip (including Stop) = .3125" - Total Height = 3.3125"

• 2.25" Inner to Outer Adapter - This was an adapter I made to lengthen the end of a PVC that got cut a little too short to give more room for clamping down the hose to it.
Lower - OD = 2.5" ID = 2.25" (Height = 1.25")
Upper - OD = 2.25" ID = 2.125" (Height = 1")

• 2.5'' Dust Internal Inlet - This is for the internal part for a dust separator which your vacuum/dust collection hose would attach to.
OD = 2.5" ID = 2.375"
Tube = 2" - Flange = .2378" - Total Height = 2.2378"

Added 3/5/21:

• 2.5'' Threaded Tapered End - This has one end threaded so it can be attached to a flex hose without needing a clamp to hold it in place. It could be used as just an end, but I made it to attach the hose my shop-vac to increase the hose size. I also has a slight taper to it and I made in two different length (1 1/2" and 3").
Upper - OD = 2.41" (tapers to 2.285" and .625 long) (1.625" long) ID = 2.13"
Lower - OD = 2.456" ID = 2.13" (1.075" long ) OD of thread = 2.628"
Stop - OD = 3" ID = 2.87 and 0.315" deep
Total Height = 3.325"

Added 3/9/21:

• 2.25" to 2.5" Adapter - This just a simple straight pipe adapter to attach to a 2.25" fitting/port to a 2.5" hose. Note: one end has a rounded outer edge that goes towards the hose and the other end has a rounded inner edge that goes towards the fitting/port.
OD = 2.48" ID = 2.25"

• 2.5" Inner to Outer Adapter - This was an adapter I made to lengthen the end of a PVC that got cut a little too short to give more room for clamping down the hose to it.
Lower - OD = 2.75" ID = 2.5" (Height = 1.25")
Upper - OD = 2.5" ID = 2.25" (Height = 1")

• 2.5'' Dust Intake - This is a 3.25"X7" intake port for the external part for a dust separator or power tool which your vacuum/dust collection hose would attach to.
OD = 2.5" ID = 2.25"
Intake and Tube = 1.5" (ea.) - Insert Lip (including Stop) = .3125" - Total Height = 3.3125"

Added 3/13/21:

• 2.5'' Threaded 2.5" Slip Adapter - This has one end threaded so it can be attached to a flex hose without needing a clamp to hold it in place and the other end a hose can be temporary slipped on or clamped down.
Upper - OD = 2.49" ID = 2.125" (2.25" long)
Lower - OD = 2.456" ID = 2.125" (1.075" long ) OD of thread = 2.628"
Stop - OD = 3" ID = 2.87 (0.315" deep)
Total Height = 3.325"

• 2.5'' Hose Hold Downs - These are for attaching your dust collection hoses to a wall, side of a cabinet, etc.. There are three different ones, two that have a flat inner face for going around a flex hose if it's collapsed, and the second for command 2.5" PVC pipe. The third one has a inner beveled face for going into the groove of a flex hose when expanded.
Flat Faced - OD = 3.25" ID = 2.85"
Flat Faced PVC - OD = 3.275" ID = 2.875"
Beveled Faced - OD = 3" ID = 2.52"

Added 2/5/24:

• 2.5" ID to 5" OD - (Upon request) This is a reducer to attach to a 2.5" OD fitting/port to a 5" ID flex hose.
Small Port ID = 2.504"
Wall Thickness = .1875"
Total Length = 5"