🇪🇺 I've decided to move my 3D models to a different website. The files for this Thing can be downloaded here: https://www.printables.com/model/1233320 🇪🇺
-----
I looked at the filament mount my *Flashforge Creator Pro* came with and thought: *What if it had ball bearings?* So I did a re-design and later added a guide to prevent filament jamming. For a more detailed description see the pictures and texts below!
***Required Parts:***
for 1x **Filament Mount**
- printed parts:
- 1x *Mount_Base.stl*
- 1x *Mount_Cylinder.stl*
- 1x hex head screw M8 x 90mm
- 3x washer M8 (inner diameter: 8.4mm, outer diameter: 16mm)
- 1x nut M8
- 1x locknut M8
- 2x ball bearing (inner diameter: 8mm, outer diameter: 22mm, width: 7mm)
for 1x **Filament Guide**
- printed parts:
- 1x *Filament_Guide_Part_1.stl* (printed mirrored for the second side)
- 1x *Filament_Guide_Part_2.stl*
- 1x *Filament_Lid.stl*
- for assembly of **Filament Guide**
- 1x ball bearing (inner diameter: 4mm, outer diameter: 12mm, width: 4mm)
- 1x washer M4 (inner diameter: 4.3mm, outer diameter: 9mm)
- 1x spring lock washer M4
- 1x threaded insert M4 (I use inserts from [Ruthex](https://www.thingiverse.com/thing:4682424))
- 1x socket screw M4 x <16mm
- for installation of **Filament Guide** to **Filament Mount**
- 2x nut M3
- 2x socket screw M3 x 8mm
Zwom
