March 3, 2021
Description
UPDATE: V2 with hole for hex key (24.03.2021)
You need the lcd-cover.stl and spacer.stl from the original by otioss
"please don't forget to set #define LCD_FLIP 1 in the firmware according the the guide." -otioss
visit otioss Website for further instructions
Features: Lcd mounted on the left side of the 3D-Printer so you can still use the drawer, there should be enough space to plug in an adapter in the micro-SD slot and a micro-USB cable underneath.
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
15,659
0mma
