Barbie Coffee Table

A coffee table for a Barbie dollhouse. The two chairs on the pictures are the excellent Barbie Jacobsen Egg Chair by Deleven.

The table was printed on a single extruder Ender 3 printer using a technique from Make Anything.

I have modified the technique a little using PrusaSlicer see the YouTube video:

1. Insert the Barbie Coffee Table.stl file into PrusaSlicer and ONLY this file
2. Instead of inserting the logo in the same way, right-click on the name of the inserted part in the middle right window and select Add part -> Load
3. Choose the Barbie Coffee Table Logo.stl file and click OK
4. Right-click on the subitem Barbie Coffee Table, select Change type and set it to Modifier
5. Set the Layer height to 0.2 mm and tick Avoid crossing perimeters under Print settings -> Layers and perimeters
6. Set the number of Loops to 0 and Brim to 0 mm under Print settings -> Skirt and brim
7. Set Lift Z to 0.8 mm under Printer Settings -> Extruder 1
8. Slice the model - only the logo should be visible after slicing - and print it
9. Change filament to the desired color for the table itself
10. Right-click on the subitem Barbie Coffee Table, select Change type and set it back to Part
11. Right-click on the subitem Barbie Coffee Table Logo, select Change type and set it to Modifier
12. Slice the model using the same settings as above and print it