Voron Afterburner/Stealthburner Gallileo Clockwork mount plate for Creality Ender 3 / CR printers with bl-touch and accelerometer (ADXL345 or similar) mount. (fits 1.5 version of official orbiter kits but you need addtional 1pc MR 148ZZ bearing)

Full area of heated bed.

Here you can find motor cooling fan mount (3010)
https://www.thingiverse.com/thing:4893976

Video
https://youtu.be/B10BsKbm2vA

Tested with stealhburner (CW1 version) too.

Versions

Version 2.3:

• Optimized version
• Improved bl-touch mount, additional reach
• Added support for motor cooling fan (3010), standard mount holes (expect zipchain mount)

Version 2 beta:

• Completely remodeled to match latest version of Afterburner Galileo Clockwork.
• Added custom bl-touch mount rotated cables out to make space/avoid collision with extruder wiring and gain some reach on left side of X
• Heat inserts for Bl-touch and ADXL mounting
• Still in progress will add customized cable cover with cable attachment and a cooling cover for orbiter later

SETTINGS

Probe X offset from nozzle: +39mm
Probe Y offset from nozzle: +8mm

Klipper

[bltouch]
x_offset: 39
y_offset: 8

[bed_mesh]
mesh_min: 23,6 # i have very thin clips on my bed ... if you have bigger just add 1-5mm to second value
mesh_max: 230,226 # if you have bigger clips than me :-) just subtract 1-5mm from second value

[stepper_x]
position_min: -16
position_endstop: -16

[stepper_y]
position_min: -15
position_endstop: -15

BOM (mount)

Mount
2x M3 6mm BHSC (optional)
2x M3 6-8mm SHSC (BHSC)
2x M3 10mm SHSC (BHSC) - hotend fixes
11x M3 D5 L4 Heat Inserts

Orbiter
M3 16mm SHSC (BHSC)
M3 20mm SHSC (BHSC) - lower hole
2 x MR 148ZZ

Extruder body
M3 25mm SHSC (BHSC) - wire cover side
M3 30mm SHSC (BHSC) - top - motor cooling fan side
M3 25mm SHSC (BHSC) - bottom - motor cooling fan side