Mag Release for the Gecko Blaster

This is an addon modification for Ehdrien’s Gecko foam blaster. You need to purchase or assemble your own Gecko in order to make this Mag Release work.

Ehdrien's Gecko: Link

Extra Hardware you need:

• A spring in 5mm diameter, 18mm length, or similar
• A M3 nut
• A M3 35mm bolt

All details please see included pdf manual

---

LICENSED SELLER

This mod is under CC-BY-NC-SA license.

A commercial version of the mod is licensed exclusively to Rainbow Mods & Props, you can get it physically from Rainbow's shop. Visit his shop at: https://rainbowmods.com/

There is no functional difference between two versions. The Rainbow's version is only more polished and optimized.

22 March 2021 UPDATE

• An extra lever version that using the original Gecko hardware: (only hardware difference)
  1x M3 30mm bolt
  1x M3 5.7mm heat threaded insert
• Ambi version, hardware:
  1x M3 5.7mm heat threaded insert
  1x M3 30mm/35mm bolt (depending on which lever version you print)