CR-6 SE PSU Cover w/ Directed intake / Exhaust

Added V2 which has different scoop style, larger intake and exhaust opening and can be completely screwed together. you will have to tap the scoop holes and cover lip on the intake side

Remix from https://www.thingiverse.com/thing:4730915

Added the glue lip to the intake side rather than the exhaust side.

Adapted 2 fan scoops. 1 to cover the intake and allow the fan to draw air from right side of the printer. 1 to cover the exhaust and direct the warm air to the left side of the printer, towards the filament spool.

Print the intake side with the glue lip and ring upwards. Supports touching the bed only for the glue lip. Brim to keep down warping

the exhaust side is just a flat sheet so the up side is n/a but use a brim to keep down warping

Glue the 2 haves together and glue the scoops on

completely personal choice one what scoops to use. I only use the exhaust scoop to blow the warm air towards my filament spool