Voltex Style Front Lip Splitter Evo X Model or RC Car

This is a model of the Voltex front lip I designed for my Evo X model. This part was designed to fit this 1/34 scale model and fits perfectly as seen in the pictures. Due to the small design scale, some of the parts are larger than they should be to make the part printable, but can be trimmed or sanded down once printed if using a larger scale. I would think this lip will fit on other scale models and RC car bodies too when scaled up. Use the CAD file and CAD software to measure and scale for your specific model and then import into Cura as an STL to print or, for a 1/10 scale car try scaling the model to 340% in Cura. To adjust for a specific scale try this equation: 34 x (your model scale) x 100% = % scale in Cura. Ex: 34 x 1/12th x 100% = 283.33%.

The last picture of the real car with the real lip is not mine