March 19, 2021
Description
For Sidewinder X1 , X2 and Genius !!!
Watch the video linked here to see how it mounts.
Video in English and German available.
Full view at your extruders nozzle while printing.
With fully integrated BLTouch or Clones mount (4 parts to print)
If you don´t use a bed level touch sensor on your X1 or Genius, no problem.
You can still use these parts. You just don´t need the the BL touch mount. Instead you need two litte 3mm spacers instead of the Bl touch mount, so that the Main Body bolts nicely to your Extruder.
Designed to print without any supports.
Two little inbuild supports have to be removed with a cutter knife before using the mod.
Air vent electrical line has to be extended a bit.
Or buy a new fan with longer cables at arount 7 Dollar.
At 0,2 mm layer hight and down to 30mm/s print speed it will take aprox 5 houres to print the main body.
For those of you who want to change an remix my work, I also updoaded the step files which you can directly open in your cad software (fusion 360 for example). You can easily change the part.
I also provide a pure Air Fan duct DIY adapter plate. You can easily design your own Air duct to it in case you dont agree with my design.
And as always, you have also the opportunity to tip "Trinkgeld" the designer at the right upper corner in the Thingiverse menue. Because you anticipate how many houres it takes to create such a fine model :-)
One last comment to the Sidewinder X2.
Others have told me that it fits also for the X2.
I don´t have an X2 and didn´t design it at first hand for the X2.
Since the X2 comes with it´s own touch sensor, you might have to adjust a bit.
Update Feb 2022:
User Herbert S. has redisigned the Air fan duct to get more air from behind and the left side. Just use those if you prefer, His three files are marked with "Herberts Mod .."
I have not tested Herberts design. Just try it.
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
658
Just-Printed_3D
