RPi CM4 IO Board Bumper Case

Do you want to protect the bottom of your Raspberry Pi Compute Module 4 IO board but don't want to spend all day printing a case? This is a simple bumper case that has standoffs to support the board. All the numerous ports are still accessible. The IO board is secured with M2.5 bolts with inset nuts flush with the bottom of the case. They're tapered so support material isn't required.

Both the STL and Fusion 360 files are attached. It's parametric. So the measurements are adjustable if needed.

Four M2.5x8mm bolts and nuts are required.