Peppermint Basket

A packing puzzle. Insert the pieces into a 3x3x3 box with a special handle. The pieces must be within the basket and there should be no voids visible on top.

If you found the regular Akaki's Picnic puzzles too easy, you can try this one. It's the final boss of Akaki's Picnic.

Note about tolerances
If the pieces are printed too loosely, there is a second, easier solution. Look at the example photo (not a spoiler). If you can fit the piece diagonally like in the photo, then your tolerances are too sloppy, and the second solution is possible.
I recommend you print this puzzle in the larger format, as it doesn't have tolerance issues. Files are included for both 12.75 mm block size and 0.6 inch block size.

Check out the other similar puzzles in the series: https://www.thingiverse.com/akaki/collections/akakis-picnic-basket-packing-puzzle-series

Inspired by Mushroom Basket by Andrey Ustjuzhanin: https://www.thingiverse.com/thing:4726487

Prints with no supports. Glue the connectors together before attempting the puzzle.

I printed the puzzle in PLA at 0.2 mm layer height.

Openscad / Puzzlecad files included.

https://www.youtube.com/watch?v=RADwsTj0Ia0