GeckoMod & EVA 02

1未经测试，谨慎使用

1. this has not been tested so carefully print it

2左边轨道用滚花螺母嵌入，右边轨道插入M3X40内六角固定
2. Use threaded inserts on the left and M3*40 hex bolts on the right

2.5 弹匣井内需要嵌入一枚弹簧滚珠，规格已经在图片中提供D6L7
2.5. the magwell needs a D6L7 spring ball plunger screw

3底座适用于龙爪弹匣，使用nerf规格的螺丝安装
3. the base is compatible with short slanted talon mags and uses nerf screws to install

4握把套与原作者的握把套安装方法一致
4. the grip installs in the same way as the original gecko

5有问题请留言反馈
5. If you have any questions feel free to comment or send a message

6此图纸为J xu订做，所以仅授权 Jxu进行商业打印，非商业使用不受限制
6. This design is specially made for James Xu so he's the only one to use this design commercially, non commercial uses are not limited

front前面的装饰，可以用胶水固定，也可以直接不安装，随意
*Front * the front decoration can be fixed with glue, or it can be fixed without installation

EVA_LOGOEVA的装饰，可以用胶水固定，也可以直接不安装，随意
*EVA_ Logo * EVA decoration, can be fixed with glue, can also be directly without installation, at will