PRINT-IN-PLACE, WALL MOUNT, SMOOTH AND SILENT, EASY CHANGE EASY PRINT UNIVERSAL SPOOL HOLDER

PRINT-IN-PLACE, WALL MOUNT, SMOOTH AND SILENT, EASY CHANGE EASY PRINT UNIVERSAL FILAMENT SPOOL HOLDER.

This is a rolling wall mount spool holder with following qualifications:

• Print-in-place
• Smooth and silent
• Rolling
• Strong
• Print and use (only three standard screws are required to fix to wall or wood panel)
• Suitable for most stadard spools (spool diameter: min 51mm and more, length: upto 80mm)
• Easy change of the spool (no screwing), just hang.
• Easy print: No build plate adhesions or supports needed

Print: upsidedown (to avoid overhang)
Infill: 0 (zero) for the rolling drum,
100% for the shaft and base (to give strength)

As the model is designed as print-in-place, use your slicer's settings to manage different infill ratios for different parts of the model. See pictures for CURA.

Build plate adhesions: None
Supports: None

After print advise: Before first use, pour some powderized dry soap to lubricate the touching parts between drum and the shaft which makes the spool holder very smooth and silent.