Yet Another Nerd Solution - BTT TFT24 V1.1 to Eryone 3D printers

Disclaimer:
Use this thing at your own risk, it works for me, you are modifying the 3D printer. The author or the hosting site cannot be held responsible if anything goes wrong and messes up your print, machine or if your house catches fire. Use common sense and always wear proper protective gear when using power tools, grinders, drills, etc.

Source from https://www.thingiverse.com/thing:4231367

A custom mod to replace the Eryone LCD with a BTT TFT24 v1.1 touch screen.

Front - 0.2mm, 30% infill, face down, brim, no support.
Backplate - 0.2mm, 30% infill, ** sideway, brim, support (Tree, everywhere, 80° angle - for clean mounting holes).
Backplate Marlin compatible- 0.2mm, 30% infill, brim, no support (sandwich between Front housing and Backplate, needs M3-25 screws).
Standoffs 0.2mm, 100% infill, brim, and no support.

BOM:
4 M3-20 screw.

** You must print the backplate sideway, otherwise, you won't be able to install or remove it from the Eryone printer (The tags break right away if you don't print it sideway).