Honeycomb Bravo Throttle Levers Cessna Citation Longitude Airbus A220 C-Series

Throttle Levers for Honeycomb Bravo Throttle Quadrant

Style: Cessna Citation Longitude / Airbus A220 / Bombardier C-Series

With 2 working buttons on each lever.

These Throttle levers fit perfectly onto the Honeycomb Bravo Throttle Quadrant. They can be equipped with pushbuttons on the lever itself and the handle e.g. for TO/GA and Autothrottle/Autothrust engange/disengage. Since the bravo only allows 2 buttons per lever, there could not all real buttons be included. The base is separate because it needs to be printed on the flat surface in order to be strong enough to withstand the tight fit onto the throttle quadrant. Both levers use the same base, which always has the same orientation.

To assamble both levers you will need:

6pc. M4x20 hex bolts
4pc. M3x10 countersunk screws

To include the buttons you will need additionally:

4pc. pushbuttons normal open https://www.amazon.de/gp/product/B07VCQCH2Q/ref=as_li_tl?ie=UTF8&tag=flo4nau-21&camp=1638&creative=6742&linkCode=as2&creativeASIN=B07VCQCH2Q&linkId=b46088ca8d33bdef8d7e66d784ff3c5b

6pc. Pogo-Pins 1,5x5mm https://www.amazon.de/gp/product/B07FPCPX8X/ref=as_li_tl?ie=UTF8&tag=flo4nau-21&camp=1638&creative=6742&linkCode=as2&creativeASIN=B07FPCPX8X&linkId=3f68cd051d74a95c4c58ca9dd33c4360

some thin wires, cross section does not matter. Not more than 2mm diameter to fit the holes. The wiring is shown in the photos. The pin facing towards you (first one) is always the COM-pin, which then can be shortened by the two buttons for the other pins. That triggers the equivalent functional buttons of the bravo. You may need to drill the holes for the pogo-pins open to be able to squeeze them into position. The holes are 6mm deep so the pins will be able to bounce 1mm.

Have fun printing and flying! If you have any questions, just let me know.

Please respect and do not sell these things.