Summary

A Tiki torch cup that holds a standard size Tiki can.

Fits perfectly on 1 inch PVC pipe as a pole.

(Will add pics of them finished an lit after the paint dries)

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2mm layers, .8mm top, bottom &amp; walls, 50mm/s</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20</p></div></p>                                                    <strong>Filament:</strong> 3DSolutech PLA                Any                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Print in the default orientation with the pipe hole down.  Use a raft as this is tall and has very little surface area on the build plate.</p><p>I recommend starting at 50mm/s but as it gets taller reduce steadily for best results until you are printing at 20mm/s at about 65%-75% complete.</p><p>If using PLA (as I did) its recommended you paint the part generously to protect it from the outdoors.</p></div>

Tiki Torch

Tiki Torch

Related Models