Important Please Read!
The vid has assembly instructions (The hovering gear and mount is *duh* Where the stepper goes)
every part except stepper is printed
Currently Printing Clay! (ill post photos soon)
If you do not want to buy a new stepper,Use the stepper from your Extruder (Gear Part) cos u don't need it for this. u can always re-attach later
You can print things that are pastes *duh*... like clay, thick cookie dough. stuff like that
I can't be bothered writing things at the moment. I will do a proper desc after I have tested...
Post ya makes!
Works on any printer with the Creality X Carriage... So print that if u want to use it on ur printer.
I think this x-carriage may work
Just screw off the hot end and screw this on with the pre existing screws (The paste extruder has adjustable nozzle height)
I recommend just printing the small bottle mount as a test to see if the holes line up, they may be different due to manufacturing variations.
Also I recommend u print this model hereIt is a thread calibration. to see if if your settings are correct for this
There r multiple different sized nozzles:
•1mm
•3mm
•5mm
•8mm
•10mm
•MK8 Adapter (Use your printers nozzle for a different size)
•A Nozzle Tool to help you install
WORKS ON ANY PRINTER WITH CREALITY X CARRIAGE!
Changes Since Publish:
Fri 9 April 2021:
• Fixed Thread
• Added Nozzle Tool
Sun 11 Apr 2021
•Added 8-5mm Hole Adapter
Sun 18 Apr 2021
•Added Fixed Stepper Mount for Nema 17 Stepper
Sat 1 May 2021
•Made Stepper mount stronger
•Fixed hole size in Shaft Gear
•Added thread to X-carriage Mount
Mon 3 May
•Made thread full length on Small Bottle.
The rod can be tricky to print!
TheSamCo
