Large DIY Parallettes | 90 Degree joiners for 1 & 3/8th inch wooden dowels

This is the stl for the joiners I used to make a set of parallettes. Check out my full video on them for more info: https://youtu.be/2QwB2n_-5ao

Uses 1 * 3/8ths wooden dowels from your local hardware store. You'll also need 1inch schedule 6 screws.

You can get away with only printing 12 of these out for a fairly sturdy parallette. I was able to get 250lbs on one without breaking, BUT I would strongly suggest printing 16 out and filing in the overhanging top bar with another joiner so there are two on each joint.

Printed at .32mm with 4 perimiters and 10% rectilinear infill.