Voron Afterburner toolhead bowden guillotine

The Voron toolheads may have a small bowden piece on to to link to the extruder or bowden mount

On the afterburner CAD, it measures 6,82mm.

I designed a bodden cutter wich shall provide a straight 90° cut of the boden, and may be used on one side to adjust the voron toolhead requirements. Just apply the tool on top of the toolhead, like being mounted to an actual extruder, and cut to the right lentgh.

Parts needed:
1x segment of cutter blade Olfa LBB10
2x M3x16 screws
6x 6x3 Neodyne magnets, like the one used on the hall effect sensors.

Magnets shall be mounted in oposite directions in top and bottom parts, to have a spring like effect.
As applying the magnets may be difficult, I also made a small tool to help. Just apply a firm push to get the magnet centered, and than use an M3x30 or M3x40 screw to push it down to depth with the tool

Enjoy