OrcaTorch D710 Goodman Holder

OrcaTorch D710 Goodman Holder

Compact Goodman Holder for Orca Torch D710.

1. Basic Version for light only
2. With Trilobite cutter holder
3. With rearview mirror and Trilobite cutter holder

• 2 inch (50mm) rear view mirror for cars something like
  Blind Spot Mirror, 2"
  https://www.amazon.com/Ampper-Blind-Mirror-Frameless-Convex/dp/B01CV4ANCC/ref=sr_1_3?dchild=1&keywords=rear+view+mirror+2+inch&qid=1618801903&sr=8-3

I recommend to take off the double sided tape from the back of the mirror and use Super Glue to fix the mirror in place. It gives a slicker profile.

• 3 or 4 mm bungee cord
• 3mm neoprene which you can glue with waterproof double tape to the down side of the curved holder so you get better comfy experience compared to hard plastic to the back you your hand.
• Bolt snap

P.S. Photos are from different light (K-1 Model from Korean tec brand) holder but it is THE SAME holder, just the holder tube is different diameter. All other design properties are completely the same, also the mirror if bigger cuz I glued 70mm bigger mirror over the 50mm