Protective cage for Icom IC-705 (split version - 2 parts)

Split version in 2 parts that can be printed with almost all 3d printers.

14th June 2022 update (v6 version), compatible also with Windcamp RC-2 antenna bracket; 2 versions available (BP-272 standard battery, BP-307 large battery). Not tested up to now since I don't have RC-2 and BP-307.
BP-307 version is compatible also with 18650 battery packs made by RA5BW: https://craftbattery2.wordpress.com/2021/05/26/battery-id-52-ic-705/
Design change based on your proposals and measures.

Features:
-protection extended also to the back zone of the radio (battery can be removed without disassembly the cage, if Windcamp RC-1 is installed it should be partially unscrewed to change battery)
-more compact design (lateral dimension reduced by 6 mm)
-compatible with Windcamp RC-1 antenna bracket
-compatible with Manfrotto PIXI mini tripod
-upper slots useful to fix external accessories (e.g. mAT-705 tuner)
-the mike can be clamped to the lateral bars to avoid falling when not in use
-flat base with proper tilting if used as desktop stand
-all knobs, dials and connectors are easy accessible
-non-slip option, 10x seats for 8 mm rubber pads are available on the lower surface of the base

Screws required:
-4x socket countersunk flat head screws M4x12 or M4x10
-1x M4 short screw (max 5 mm of threaded portion) in the upper bar zone

Old product is available at the following link (due to some bugs it is not visible by searching it, sorry): https://www.thingiverse.com/thing:4821075

For best printing results I recommend PLA+ and to orient the models like in my pictures and use Tree supports if you are using Cura (view the experimental settings).

Follow me and share your prints on Instagram and Facebook @IU1OPK
Visit my website to be updated about all my projects https://www.iu1opk.com