5 Inch Dust Collection Adapter Harbor Freight

I was making a thein dust collection setup and wanted a few magnetic connectors. I wanted to be able to remove/move the trash can easily while having my harbor freight dust collector wall mounted.

I used the stock harbor freight 5 inch hose for this.

All of these have 125mm outside diameter and a 119mm inside diameter.

The male end has another cog which was used to screw into my collection system. The female end was used on the hose. The double piece will be used to connect my filter,

I used 10x3 mm magnets and alternated polarity on each hole. I also made sure to push the magnets so they were either flush or slightly inset as I have heard magnets crack/break. I used superglue to keep them put.

Hope this helps.

I included a picture of the thein which also shows a 4 inch connector which I will be uploading shortly. The 5 inch connectors are located on the top.

Magnets I used --> Amazon Link