April 24, 2021
Description
Printed with PETG to sustain summer temperatures and UV. 80% Infill and 8 bottom&top layers. Should survive a lot of abuse.
Used DIN912 M3x30 screws with sunk head cap that I drilled manually (6mm drill). Alternatively countersunk M3x32.5 should work. Screwed on and glue the halves with epoxy. Don't forget to waterproof the material.
Designed to use a WS16 Connector, see picture.
Battery is a very tight fit, be precise with the cells, don´t waste space...
10" tires recommended.
See botox github for electrical configuration and buy him a beer :)
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
matthiasmo
