"Score" No.2 - by Causeturk - Graffiti

Hi there,
here is the second piece from the collaboration with the fantastic graffitti artist Causeturk. Everything is uploaded with his permission. I'm really enjoyoing this collaboration. Check out his Instagram (link below). Try to support artists when you like their work. In case you do go and leave him some likes. This print is meant to be hung on a wall with double sided tape for example.

If your an artist and consider 3D printing your work, please approch me in any way. If you print this please let us see it and leave some feedback if you like.

---

Print

This is printed with 0.2 mm layers and a z-color change. The color change itself and all relevant printing parameters can be seen and adjusted in the Slic3r .3mf file. The filaments I used are linked below. _____________________________________________________________________

Design:

I was googling 3D- and wildstyle graffiti and Causeturks work popped up and stood out to me. Especially from the printabality point of view. I took one of his black and white pieces "Score" and edited it with paint.net (link below). From there we decided to do some more prints and here we are.

I made the image black and white and adjusted the grey values, made the contrast higher, removed some unwanted noise and so on. Then I took the new image to inkscape (link below) and traced the bitmap to create an .svg file. This .svg file is then loaded to Fusion360 (see th .f3d file). Here I had to modify the piece itself. There were to many small details that would'nt be possible to print. Also some lines on the letters were to thin, so I made them a little bit thicker. I tried to change as few things as possible to keep the soul of the piece. If you do change anything remember to always respect the work of the artist.

---

Links

Causeturk on Insta
https://www.instagram.com/causeturk/

Filament 1 Grasgreen.
https://www.dasfilament.de/filament-spulen/pla-1-75-mm/60/pla-filament-1-75-mm-grasgruen?c=11

Filament 2 (light green):
https://www.dasfilament.de/filament-spulen/pla-1-75-mm/119/pla-filament-1-75-mm-das-filament-gruen?c=11

inkscape (open source vector image editor)
https://inkscape.org/de/

Paint.Net (open source image editing software)
https://www.getpaint.net/index.html

How to colorchange:
https://www.help.prusa3d.com/en/article/color-change_1687