April 27, 2021
Description
In order to build a printer on water cooling, PC cooling technology is used. This one is very expensive. Especially the balancing tanks.
I’ve now taken a simple tube from sewage water (DIN EN 1451B) 50mm and designed a tailpiece at the top and bottom. I tested the tightness up to 4 bar.
like:
https://www.amazon.de/Ostendorf-HTsafe-HT-Rohr-mit-Muffe/dp/B075HGVX2D/ref=sr_1_18?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=din+en+1451+rohr&qid=1619543601&sr=8-18
or
https://www.marley.de/htem-rohr-mit-steckmuffe/090436
you can get it for a few cent.
I printed it with Photon Anycubic Printer. Resin I have the ABS like by WAISTEK.
License:
Creative Commons - Attribution
cheffeundwackl
