BIQU B1 hotend USB C breakout board cover plate with "gap fix" and improved X carriage eccentric nut clearance

I downloaded the original file from BIQU github as i wanted to fill the gap between the cover plate and X- carriage. I scaled the original part in Z axis to make it thicker, but after printing i found out, that the cutout for the eccentric nut is too small.

This issue might be caused by Hydra V6 hotend mod having the breakout board slightly lower than the stock hotend, so i recommend printing this part if you are doing the mod.

Anyway, i made the nut cutout similar to my original cover and made the part 1mm thicker to fill the gap.

On the first picture the white one is the stock one and the black is from BIQU github, the second picture has the stock one and the modified one.