Photovoltaik Solar Dual Axis Tracker

This set contains 6 3D printed parts to create a 2-axis solar tracker. You need 4 parts of ball bearings-6x3x2-5.stl and only one piece of all other parts.

If you need my firmware with digital filter for each axis, you have to pay 15 € for this firmware. If you don't want to pay for firmware, you can find many varieties of it on the internet.
For contact please go to my homepage www.3d-space.org.

For the construction I used 3 60x60 mm photovoltaic plates, 2 SG 90 servos, an Arduino Uno board, an Arduino UNO MEGA Duemilanove Sensor Shield V4 digital analog module servo motor, DC-DC converter, 4 photo-light-sensitive photo resistor 5mm GL5528, screws and plexiglass plate 150x200 mm.

I used this tracker as inspiration for https://www.browndoggadgets.com/products/dual-axis-smart-solar-tracker but wanted to make it simpler and more 3D printable.