Voron Afterburner see-trough low profile side dual bowden Y-Splitter

Voron Afterburner see-trough low profile side dual bowden Y-Splitter with quickdisconnect

Update: V2 with embedded magnets and core Y-Splitter printed separately.

The switchwire Y-Splitter bowden design for the Afterburner didn't do it for my personnal setup, as I was lacking clearance above my modded Ender5+. I did a previous Y-Splitter with outputs on the back, but I changed my spools positions to the front for easier access and hence needed to de a rework. (https://www.thingiverse.com/thing:4836168)
This splitter will be much easier to print than my previous design.

I've included STLs for a dual color print. The idea is to use translucent filament for the core of the Y-Splitter with 100% infill, or to print with SLA in clear resin, in order to be able to have a visual check of the splitter status. Quick fan removal is possible due to my quickdisconnect design. (https://www.thingiverse.com/thing:4832526)

This design may not suit a classic voron 2 design, with a Z moving gantry, but may stil be of use for other Creality users or Voron 1 users.

The rear part is the standard bowden rear part as on the Voron Github.
You may require some slight supports for the middle part's cut-out for the extruder cable management.

BOM:

2x M3x10 screws
2x M3x25 screws
6 M3 inserts
2x Easun ECAS04 Bowden Collets
3x 6x3mm magnets
1x 4 pin JST PCB header

Have fun