ITX Computer Case Bamboo Tower

My new designed ITX computer case "Bamboo Tower".

I printed the Case in PETG, no temperature problem. (PLA not tested)
The case is completely ready to print.

I am currently working on the 380 ° dust protection.
Will be usable as an extension to this case.
Presumably even without having to print the existing component again.

Used PC hardware:
MB: AsRock H87M-ITX (4790K)
VGA: EVGA 1070 SC Gaming (ACX3.0 Designe)
PSU: EVGA SuperNOVA 550 GM SFX
CPU Fan: Noctua NH-U9S
Case Fan: Noctua NF-A9x14 PWM 4-Pin

You need.
Inner frame:
Aluminum flat bar: 4x 40mmx3mm (for my 1070 4x 280mm)
All dimensions for holes see pictures
24x countersunk head screw M3 x 12mm
24x nut or self-locking nut M3

PSU:
2x 6mm PSU screw
1x C14 panel mount socket
1x C14 angle cable, 300mm (angle orient yourself to your power supply)
2x countersunk head screw M3 x 16mm (for C14 panel and cap)

SSD:
One SSD:
4x countersunk head screw M3 x 8mm
Two SSDs:
Print Two SSDs holder
4x countersunk head screw M3 x 8mm
8x countersunk head screw M3 x 6mm

MB:
4x standof 6,5mm (i use 6mm standoffs and 0,5mm washers)
4x screws for the mainboard

Case Fan:
4x 14mm Case screws

VGA:
2x countersunk head screw M3 x 16mm (for card holder)

Bamboo shell:
Bamboo round pole 6mm
6x countersunk head screw M4 x 60mm

Standing foots:
16mm Steel button (amazon.com/-/de/dp/B00XVJ9M9C)
4x countersunk head screw M4 x 20mm
4x countersunk head screw M4 x 16mm

---

Printer: Anycubic i3 Mega
Material: "Das Filament" PETG
0.2mm
no support