Digital Bird WIFI remote

This is the Digital Bird WIFI remote split away from the slider because it may also be used for other parts of the Digital Bird Camera motion control system independently and I decided it warranted its own project heading. Updates 17-02-23--The parts have been strengthened to better cope with me dropping it al the time! The controller has know been updated to take larger 2000mah and 5000mah batteries. with a a choice of backs to suit. Previously I was using the Feather board to charge the battery however this proved ineffective since the controller had to be powered on while charging. The new controller includes for a dedicated USB-C lipo charging board which is much more efficient and the controller can be powered off while charging. Video update coming soon. Warning: It has come to my attention that various batteries do not all come with the positive and negative on the same side of the plug please ensure that the positive and negative on your battery pack is correct for the project. The positive red wire should pass through to the red wire on the harness linked to the lipo charging boards. see picture of plug and note the wires are correct otherwise you may see smoke from your feather board!! Links: Component Kits https://digital-bird-motion-control.myshopify.com See it in action https://youtu.be/0aQ5hq3H00k Slider Build Video https://www.youtube.com/watch?v=efBSlnb0zCI Software https://github.com/digitalbird01/DigitalBird-Camera-Slider Pan Tilt Head: https://www.thingiverse.com/thing:4842363 New WIFI remote: https://www.thingiverse.com/thing:4853106 Focus Motor: https://www.thingiverse.com/thing:5156219 (The kits are all plug and play no need to get involved in any soldering.)