Military tent - 6mm scale on Hex base... or not

Let me state from the outset that this is, out and out, a remix/mod.
All I did was create the hex base in 3D Builder, slap the two together, then spend way too long trying to make the original model a solid that was a relatively compact size and have no errors.

After chucking a tanty with my poor skills last night which resulted in an FDM-friendly model only being uploaded, I decided to give this another crack and... it's fixed!

Please see the images above for Cura and Lychee respectively - no errors in either slicer so that means resin should now be good to go as well!

There's also now a hexless version for those who prefer their 6mm terrain that way.

[EDIT]
Resin is good to go - please see new images of the hexless print in resin. It's a bit lumpy due to support "zits" and my slicer settings but it's not in the STL and nothing that can't be cleaned up with the appropriate tools..
[/EDIT]

Using Fat Dragon Games' Terrain profile, it takes about half an hour to print with an FDM printer at 0.2mm layer height, give or take a few minutes depending on how long it takes your printer to reach temperature.

Please note that if you're looking at this and thinking "Hey, I wonder if I could scale that up to 28mm?" don't worry, it's already been done, hence the remix reference at the start.

The original tent is BoiledMouse's 28mm Modern Army / Medical Tent and is basically a shell so you can put minis beneath it if that's possible in the rule set you're playing.

I'm having to add all of this waffle because the Remix search is now broken.