Ares Stoner M4 Adapter

M4 magazine adapter for Ares Stoner
Will not work with other brand of Stoner

You will need to print the latch and pin from the original file for the adapter.
You will need the latch, latch spring and pin from original magazine. (Or use something to make the fit tighter and cram it into place, like me.)

Printer:

PETG
235 nozzle, 70 plate, 50mm/s speed, 1.7mm/s retraction, infill 25%

Time is around 6 hours depending on your support type.

Print it upside down with supports on.