3D Printed Toy Pistol Thingy Something

This is a toy chambered in 9mm Plastibellum. In addition to its use as a conventional office service pistol, it is ideal for use as a backup weapon or for home concealed carry purpose. It has a 4 inch barrel that can reach targets up to 6000mm away. With a semi-double stack magazine and a PLAlimer frame, you can expect OUTSANDING performance out of a small package. (not a glock website copypasta). COMPRENLO YA! (buy now) The pistol uses 1.75 filament as pins, because when i recorded the video I didn´t achieve neural activation. Now you will only need the springs. It comes in any color you have available in your printer, and any material you can afford. It can even sh00t re4l bu11et (NO YOU CANT DONT EVEN TRY OR THINK ABOUT IT). SAFETY: It cannot be converted into a semi auto pistol due to its firing control group, even if you manage to ignite a live round, the gun would explode and the bullet wont be fired or achieve lethal speeds. Its plastic, cmon. There are STEP files if you have achieved neural activation. Spring Details: 4 x SpringLength: 40 to 50mm SpringDiameter: 7mm WireDiameter: 0.5mm 1x SpringLenght: 100 to 120mm SpringDiameter: 12mm WireDiameter: 0.3 to 0.2mm 1x Pen Spring (4mm wide - 15mm long) (I used 4 different springs with different lenghts and winding, and all worked well. So, I´m sure you´ll find something suitable. The magazine spring I used in the video is not the one listed above, you shouldn´t use it (the one in the video) as a reference.) All the serious details are in the description of this awesome (Not so awesome) video: https://youtu.be/bGmhSpl-vTs I'm sick and tired of thingiverse.